Cadillac Products Packaging Company, Engineered Solutions
CPPC QUALIFIED PRODUCTS LISTING FOR MIL SPEC PACKAGING
General packaging specifications and standards established by the U.S. Government for use by all Department and Agencies of the Department of Defense.
MIL PRF 121G
Specification establishes the requirements for heat-sealable, greaseproof and waterproof flexible barrier material. Used for the preservation of supplies and equipment.
|Type I (Medium duty)||CadPak K-I||60# Kraft paper with sealable polyethylene coating|
|Type II (Light duty)||CadPak K-II||40# Kraft paper with sealable polyethylene coating|
MIL PRF 131K
Specification establishes the requirements for heat-sealable and greaseproof flexible barrier materials having low WVTR/OTR properties for use in military packaging.
|Class 1||CadPak PL||Plastic OPP outer, lighter sealant version of CadPak P|
|Class 1||CadPak P||Plastic OPP outer, general purpose medium strength|
|Class 1||CadPak N||Plastic BON outer, general purpose higher puncture than CadPak P|
|Class 1||Cadpak N-HD||Plastic BON outer layer, heavier duty, higher strength version of Cadpak N|
|Class 1||CadPak HD100||Plastic BON outer, heavier duty, very high seal strength|
|Class 1||CadPak HD200||Plastic BON/Valeron outer, heaviest duty, highest puncture resistance|
|Class 1||Cadpak T||Tyvek® backing, high strength and puncture resistance|
|Class 3||CadPak S||Cotton Scrim outer, increased tear resistance|
MIL PRF 22019E
Specification establishes the requirements for heat-sealable transparent flexible barrier materials that contain a volatile corrosion inhibitor (VCI) for use in military packaging.
|Type I (Heat Sealable)||CadPak VCI/Ferro Film XP||Excellent seal strength & seal initiation|
MIL PRF 22191F
Specification establishes the requirements for transparent, flexible, heat-sealable barrier materials having waterproof or low water vapor transmission characteristics for use in military packaging.
|Type I, Class 1||CadPak CL||Waterproof, greaseproof, water vapor proof. Machine or hand-fabrication use.|
|Type I, Class 2||CadPak CL||CadPak CL meets all requirements and is an acceptable substitution for Class 2 machine-use applications. Class 2 material is only authorized for machine use (not for hand-fabrication)|
MIL PRF 81705E
Specification establishes the requirements for heat-sealable, electrostatic protective flexible barrier packaging used by the military for packaging micro circuits, semi conductors and resistors. Type I material provides WVTR and the attenuation of electromagnetic radiation.
|Type I, Class 1||CadPak ESD||Unlimited use, foil barrier|